SPECTROMETER ( DELUXE QUALITY) ( CAT NO. 661)
Omega precision spectrometers are versatile and designed to achieve higher accuracy of measurement and is useful for the study of spectra produced by prisms and gratings, for the measurements of dispersive powers, wavelengths of spectral lines, the refractive indices of the material of transparent solids and liquids.
SALIENT FEATURES
- COLLIMATOR AND TELESCOPE TUBES ARE CARRIED ON STURDY MACHINES PILLARS PROVIDED WITH MICROMETER SCREWS IN TELESCOPE AND COLLIMATOR TUBES FOR FINE ALIGNMENT
- BASE IS MACHINED CASTING FITTED WITH LEVELING SCREWS AND CARRIES THE FIXED COLLIMATOR AND SWINGING TELESCOPE ARM IN PERFECT ALIGNMENT
- SLIT OF THE COLLIMATOR IS OF STAINLESS STEEL / BRASS AND JAWS ARE FINISHED AND GROUND WITH UTMOST CARE AND TESTED FOR ACCURACY OF EDGES . THE TWO JAWS ARE OPERATED BY KNURLED RING .
- PRISM TABLE WITH GRATING HOLDER IS PROVIDED WITH THREE LEVELING SCREWS AND IS ENGRAVED WITH CONCENTRIC LINES TO FACILITATE CORRECT LOCATION OF THE PRISM . IT MAY BE RAISED OR LOWERED AND ROTATED INDEPENDENTLY OF THE VERNIERS .
- SCALE IS MACHIN DIVIDED IN ½ OR 1/3 DEGREES ON A STAINLESS STEEL SCALE FROM DUST AND CARRIES TWO TRANSPARENT PLEXI PROTECTED WINDOWS FOR VERNIERS . THE SCALE CIRCLE IS PROVIDED WITH CLAMPIN AND TANGENTIAL SCREWS FOR COARSE AND FINE MOVEMENTS . TWO VERNIERS ARE PROVIDED TO READ 1 MIN OF THE ARC OR 30 SEC. AS SPECIFIED .
- OPTICS FINEST QUALITY ACHROMATIC OPTICS ARE USED THE OBJECTIVE ARE 1” CLEAR APERTURE WITH 10X EYE PIECE RAMSDEN FITED WITH CROSS LINE
- PACKING THE ISTRUMENT IS NICELY PACKED IN PLYWOOD BOX.
CAT NO. 661 – READING TO 1 MIN OR 30 SEC. OF AN ARC 6” OR 7”: CIRCLE .
Related products
-
Light/Optics
BI-PRISM ASSEMBLY (CAT NO. 457)
IT CONSISTS OF :
- BI-PRISM HOLDER: TO HOLD THE FRESNEL BI-PRISM WITH FINE RADIAL MOTION
- LENS HOLDER: AUTOMATIC SPRING LENS HOLDER MADE OF BRASS
- MICROMETER EYEPIECE: EYEPIECE FITTED ON A SLIDER WHICH MOVES ALONG THE MICROMETER SCREW
- SLIT: OPTICALLY TRUE SLIT FITTED WITH SLOW MOTION SCREW TO OPEN THE JAWS OF SLIT UNIFORMALLY
- OPTICAL BENCH: NODAL SLIDE ASSEMBLY IS FITTED ON HEAVY OPTICAL BENCH WITH TWO FIXED AND 2 MOVABLE SLOWMOTION RIDERS
-
Light/Optics
VISCOSITY BY STOCKES METHOD ( CAT NO. 159 )
The apparatus is suitable for determination of viscosity of liquids like castor oil , glycerine etc. it consists of a wide bore graduated glass tube of corning glass about 100 cm long supported in a heavy stand . the lower end of the glass tube is closed and rests on a suitable support . the upper end is closed by a rubber cork through which a thistle funnel or a thermometer can pass.
-
Light/Optics
HE-NE LASER ON STAND
- LASER : IDEALLY SUITABLE RED LASER LIGHT FOR INTERFERENCE AND DIFFRACTION EXPERIMENTS. LASER TUBES ALONG WITH POWER SUPPLY ARE HOUSED IN POWDER COATED BOX.
- MOUNT: THIS RECTANGULAR STAND IS SUITABLE TO FIT OMEGA HE-NE LASER. THIS MOUNT CAN BE USED ON OPTICAL BENCH AS WELL AS ON HEAVY BASE. THIS STAND IS USED TO ALIGN THE HE-NE LASERS WITH OTHER OPTICAL COMPONENTS.
- SUPPLIED WITH HEAVY BASE.
-
Light/Optics
NEWTON RING MICROSCOPE COMPACT TYPE ( CAT NO. 667-ii )
This Newton ring’s microscope is compact type with built in all necessary arrangement required for conducting newton’s ring experiment . The whole microscope tube unit can be raised or lowered and can be clamped in any desired position. The focusing of the microscope unit is done by rack and pinion arrangement.
The longitudinal movement of the microscope saddle for the purpose of the Rings is done by rotating the drum. The 26 mm movement can be read by scale and on the divided drum to 0.001 cm.
Newton’s Ring set consisting of the optical flat glass and one Plano-convex Lens (50mm radius) arranged inside a metal case resting over the stage of the instrument which can be adjusted for the alignment of the measuring line . An adjustable reflector plate in the required direction is fitted on to the side of the set. The condenser lens is provided in front of the reflector.
-
Light/Optics
OMEGA VERNIER MICROSCOPE ( CAT NO. 667 )
The instrument is specially designed for use with Newton’s ring apparatus .suitable for use in various positions also . the base of the instrument is substantial iron casting with top machined , over which slides a travelling carriage , which can be clamped at any position . fine adjustment is provided by a fine pitch screw . the microscope is mounted in the travelling carriage . microscope is fitted with ramsden eye piece and cross line with superior achromatic objective f.l 3” .
Travel : 16.5 cm and l.c of vernier 0.01 mm
Packed in superior wooden box .
-
Light/Optics
TRAVELLING MICROSCOPE 2 MOTION ( H & V ) ( Cat no. 668 )
Heavy cast iron base with leveling screws. the top machined over which slides a metal carriage. the slide can be clamped at any position by means of clamping screw. fine adjustment for final readings done with a micrometer screw. a vertical slide operating in a similar way is fitted on a horizontal carriage. the microscope with rack and pinion is fitted on the vertical or horizontal position of the microscope. the stage for placing objects for measurements fitted with a milky plate, highest quality achromatic lenses have been used.
Travel : Horizontally 16.5 cm and 14cm vertically . accurate vernier reading 0.02 or 0.01 mm. packed in wooden case
Reviews
There are no reviews yet.