MALUS LAW EXP
THIS EXPERIMENTAL SETUP CONSISTS OF DIODE LASER WITH POWER SUPPLY, PAIR OF POLARIZER ANALYSER, AND PHOTOCELL FITTED ON HEAVY OPTICAL BENCH ALONG WITH DIGITAL MULTIMETER.
Related products
-
Light/Optics
VISCOSITY BY STOCKES METHOD ( CAT NO. 159 )
The apparatus is suitable for determination of viscosity of liquids like castor oil , glycerine etc. it consists of a wide bore graduated glass tube of corning glass about 100 cm long supported in a heavy stand . the lower end of the glass tube is closed and rests on a suitable support . the upper end is closed by a rubber cork through which a thistle funnel or a thermometer can pass.
-
Light/Optics
VERTICAL READING MICROSCOPE CAT NO. ( 630 )
The omega Vertical Reading Microscope consists of a microscope with rack focusing adjustment, mounted horizontally on an adjustable vertical column. Its height can be raised 8 cm by rack and pinion and 16 cm by means of a drawtube ( total extension 24cm ) . the column is mounted on heavy cast iron base nicely painted
The scale & vernier are machines divided to accuracy within ±0.01% or better.The horizontal microscope tube is mounted on the vertical column ( fitted with spirit level )and is adjustable by smooth rack & pinion, through twin-knobs on both sides. The microscope moves on the machined inter ground guides.
-
Light/Optics
POLARIZER AND ANALYZER (POLAROID) ( CAT NO. 615 )
This apparatus consists of two identical units, each provided with a Polaroid disc mounted in a rotatable mount, with an aperture of 25mm. Both rotatable mounts have a pointer which traverses a 75mm diameter brass scale divided into 360°. The size is universal and can be fitted to any size of collimator and telescope.
-
Light/Optics
STUDENT’S POLARIMETER WITH HALF SHADE PRISM (CAT NO.620_
Analyzer brass scale graduated from 0-360 deg. or 0-180 deg. with vernier reading 6″ and accommodates a 200 mm glass tube. It is packed in a cardboard box.
-
Light/Optics
TRAVELLING MICROSCOPE 2 MOTION ( H & V ) ( Cat no. 668 )
Heavy cast iron base with leveling screws. the top machined over which slides a metal carriage. the slide can be clamped at any position by means of clamping screw. fine adjustment for final readings done with a micrometer screw. a vertical slide operating in a similar way is fitted on a horizontal carriage. the microscope with rack and pinion is fitted on the vertical or horizontal position of the microscope. the stage for placing objects for measurements fitted with a milky plate, highest quality achromatic lenses have been used.
Travel : Horizontally 16.5 cm and 14cm vertically . accurate vernier reading 0.02 or 0.01 mm. packed in wooden case
-
Light/Optics
TRAVELLING MICROSCOPE DELUXE MODEL 3 MOTION (H & V & T) (CAT NO. 669)
- Cast iron heavy base, properly machined and fitted with brass leveling screws. the bed on which the carriage moves is completely made of brass
- Carriage sliding smoothly in dovetail grooved at the base. it can be clamped at any position. its slow motion is achieved through a slide screw attached by a brass knob. it carries a vernier and slides along a scale fixed on the iron base
- Vertical pillar of brass, fixed on the carriage. it has a scale and a slider that carries the vernier with stainless steel embedded.
- The microscope fixed on the vertical pillar. it is adjustable by rack and pinion. it can be clamped at any position. an index mark indicates the correct position in a horizontal or vertical plane.
- The stage is provided with a white plastic plate
- A special arrangement is provided for the transverse movement of the microscope
- Travel: vertically 18 cm, horizontally 22cm, and transversely 6 cm.
- The movement can be measured with help of scale and vernier.
- Packed in superior wooden case
Reviews
There are no reviews yet.